Conveyor Belting

Standard Duty Welded Selvage Belting

Welded selvage belts provide more flexibility than clinched selvage.

S2 - 1" x 1" Mesh, Welded Selvage	S4 - ½" x 1" Mesh, Welded Selvage
S5 - True ½" x ½" Mesh, Welded Selvage	S6 - ½" x 1" Modified Mesh, Welded Selvage

Welded Selvage Belt Specifications

		Width		Max. Tension	Approx. Wgt.
Design	Mesh	Min	Max	(Lbs./Ft. of Width)¹	(Lbs./Sq. Ft.)
S2	1" x 1"	3"	240"	480	1.85
S4	½" x 1"	3.25"	240"	660	2.20
S5	TRUE ½" x ½"	3"	240"	750	3.25"
S6	½" x 1" MODIFIED	3.25"	240"	660	2.50

STANDARD DUTY BELT DIMENSIONS:
• Flat strip = 3/8" wide x .046" thick, round edge • Connector rod = 11 gauge (.120" diameter)
• 12 gauge (.105" diameter) rods are available for all designations.

(1) Maximum working tension per foot of belt width given for drum driven applications only.

Materials Available

Low carbon galvanized steel
C1050 high carbon steel
T-304 stainless steel
T-316 stainless steel

Features

Mesh available in four (4) different sizes.
Widths available ranging from 3" to 240".
True ½" x ½" (S5) belts with slotted holes approved for meat and poultry processing available.
Belts wider than 24" feature internal welds to prevent belt narrowing under heavy loads.

Sprockets

May be placed in the first opening on either side of the belt.

Conveyor Belting	Flights/Attachments	Sprockets	TruKey^® Shafting
-Standard Duty Clinched Selvage Belting -Standard Duty Welded Selvage Belting -Heavy Duty Welded Selvage Belting -Heavy Duty Clinched Selvage Belting -Key-Turn Heavy Duty Radius Belting	-Flights / Attachments	-Overview -T-Series Machined -S-Series -H-Series -Sprocket Material	-Overview -Material Specifications -Tolerances -Sizes and Materials -Square Shafts & Turned Ends